Update

Just another quick update on what's been going on in the work room(s)

Thursday:
We were timing diesel pumps, and this is the engine me and Lee were working on.

So, we loosened the tensioner, undid the belt like so, and i had the pleasure of taking the gear off which is (was) attached to the shaft of the pump timer.

We took the bolts off holding the pump timer in place, showed Rob, and he told us to put it back on.

 So, after putting the pump back on, we had to get the angle just right. (which took a little while)

And.... that's about correct I suppose... What do you think?

Niel thought we needed help, (which we didn't) so, he rudely barged in and showed us what we (me and Lee) what we had to do, although we had already done it!

Looks like we never touched it...

Afterwards, we headed down into another room to check out injector spray patterns.

Rob is just tellin us how this machine works. (come to think of it... how does it work? Seriously!?!)

And we got an awesome spray pattern. :3

Frieday:

Not much of us were around,.. we was just playin around with some circuits. (and I blew a fuse)

Steve telling us what we are gonna be doing with these big blocks of wood filled with electronic components

Calvin figuring out the setup

Calvin connecting the wires and correct points.

A successfully working circut

Calvin using the multimeter to testing different connections and voltage drop etc